Your primary source for shaper machines, parts & services
Retrofitting
Remanufacturing
Custom Machines

MACHINES

10-2

Specifications

Maximum Pitch Diameter (External) ..........................10"
Maximum Pitch Diameter (Internal) ..........................10"
Maximum Face Width, External/Internal.....................2"
Maximum Diametral Pitch, Spur...............................4DP
Maximum Diametral Pitch, Helical............................5DP
Bore Through Work Spindle...................................5.875"
Cutter Spindle Diameter.........................................3.643"
Maximum Helix Angle with Special Guides...............45º
Distance Between Work Table &Cutter Spindle ......10"
Maximum OD of Fixture..............................................19"
Height of Machine........................................................91"
Length of Machine.......................................................91"
Width of Machine.........................................................60"
Net Weight of Machine (approx.)....................12,000lbs.

CNC Functions
• Cutter Spindle Stroking Speed
• Work Table Infeed
• Cutter Spindle rotation
• Work Table Rotation (No change gears required)
• "Operator Friendly" questions and answer setups. 
• NO PROGRAMMING NEEDED
• One to Four cut selection
• Each cut has individual parameters of Depth of cut, Infeed rate, Stroking speed, Rotational feed rate, Degree of work rotation.
• Setups can be stored in nonvolatile memory using a setup number between 1-9999


Optional Equipment
• 3" additional riser. 24 5/8" casting. 13" from top of the table to cutter spindle
• 6” additional riser. 27 5/8” casting. 16” from top of table to cutter spindle
• 9” additional riser. 30 5/8” casting. 19” from top of table to cutter spindle
• 12” additional riser. 33 5/8” casting. 22” from top of table to cutter spindle
• Full enclosure
• Custom Risers available on request
• Hydraulic work clamping
• Tailstock
• Swing away tailstock
• 2 ½” of true cutter position
• Tilting table with +-10 deg. angle to the spindle Or 90 deg +-5 to the spindle for face gears.