Specifications

• Maximum Pitch Diameter (External) .................10"
• Maximum Pitch Diameter (Internal)...................10"
• Maximum Face Width, External/Internal.............4"
• Maximum Diametral Pitch, Spur....................4/5DP
• Maximum Diametral Pitch, Helical....................5DP
• Bore Through Work Spindle...........................5.875"
• Cutter Spindle Diameter.................................3.543"
• Max. Helix Angle w/ Special Guides.............45 deg.
• Distance Between Work Table and Cutter Spindle......................................................................10"
• Maximum OD of Fixture.......................................19"
• Height of Machine.................................................91"
• Length of Machine.................................................91"
• Width of Machine..................................................60"
• Net Weight of Machine (approx.)...........12,000 lbs.

Standard Equipment / Features

• Standard Straight Spur Guide
• 15 Hp AC Main Motor.
• 15 Hp AC Variable Frequence Drive
• 50 to 400 Strokes per Min.(others available)
• Centralized Auto Lube continuously monitored by the computer
• Coolant Sump in Base
• Removable chip basket
• Crowning feature via back off cam
• Cutter Elevation

CNC Functions

• Cutter Spindle Stroking Speed
• Work Table Infeed
• Cutter Spindle rotation
• Work Table Rotation (No change gears required)
• "Operator Friendly" questions and answer setups. NO PROGRAMMING NEEDED
• One to Four cut selection
• Each cut has individual parameters of Depth of cut, Infeed rate, Stroking speed, Rotational feed rate, Degree of work rotation.
• Setups can be stored in nonvolatile memory using a setup number between 1-9999
• Recut mode allows the operator to bring the part into size without changing the programmed parameters
• Optional Hydraulic clamping and/or tail stock can be automatic or manually controlled.

Optional Equipment

• 3" additional riser. 24 5/8" casting. 13" from top of the table to cutter spindle.
• 6” additional riser. 27 5/8” casting. 16” from top of table to cutter spindle.
• 9” additional riser. 30 5/8” casting. 19” from top of table to cutter spindle.
• 12” additional riser. 33 5/8” casting. 22” from top of table to cutter spindle.
• Full enclosure
• Custom Risers available on request
• Hydraulic work clamping
• Tailstock
• Swing away tailstock
• 2” of true cutter position
• Tilting table with +-10 deg. angle to the spindle Or 90 deg +-5 to the spindle for face gears.